Can you jet wash a resin drive? [Infographic]

Are you wondering can you jet wash a resin drive? Then you’re not alone. Many people ask the same question as they try to keep this key part of their property’s exterior looking its best. The good news is that resin drives can usually be jet washed to get rid of stains, dirt, and other residues effectively.

Jet washing a resin drive – what you need to know

Jet washing can be a highly successful method of removing stains and residue from resin bound driveways. Although resin drives are generally easy to maintain, usually requiring little more than a sweep clean with a stiff brush, they can accumulate oils and dirt over time. This is particularly the case if vehicles are parked upon them. Jet washing can eradicate stains effectively in many cases, leaving your driveway safer and more aesthetically pleasing. 

Jet washers work by using a powerful, pressured jet of water to remove dirt from surfaces. This is a far more effective method than using a brush and garden hose. Don’t risk leaving these unsightly stains and residue on your resin driveway. Even if you’re not bothered about how your driveway looks, it can be dangerous in some cases. Oil, mud, moss and algae on resin-bound surfaces can present a slip hazard, especially in wet weather. This can make it more dangerous to use and affect its accessibility. 

A driveway that’s not cleaned regularly will also have a shorter lifespan. You can improve its longevity by jet washing it on a consistent basis throughout the year. Regular cleaning will ensure that your driveway looks and performs its best for many years.

There’s no doubt that jet washing can improve the appearance, safety, and longevity of your resin driveway. However, it’s important to take care when using this cleaning method since you need to avoid damaging the surface. Use a high-pressure power washer with cool water, following the simple steps below. If you’re not confident using a jet washer yourself, enlist a local company to do it for you. 

How to jet wash a resin bound driveway

To jet wash your driveway, follow these steps:

• Spray with a flat nozzle if possible since this will improve the precision of spraying the flat surface.
• Use a jet washer with a pressure of up to 150bar. A jet washer with excessive pressure could cause damage to the resin surface.
• The water should be cool, without being too cold. Using water at a moderate temperature will help prevent any damage to the resin driveway.
• When spraying the water, the nozzle should be at least 20cm from the resin surface. Spraying a high-pressure jet wash too closely may cause damage to the surface.
• Spray using a “sweeping” motion.
• To maximise the effectiveness of the jet wash, it’s a good idea to sweep away debris from the driveway first.

Can jet washing remove weeds? 

Many people wonder if jet washing can remove weeds that have grown up through their resin driveway. Even though resin bound surfaces are weed resistant, that doesn’t mean that they don’t sometimes appear. If small seeds find their way onto a driveway, this can lead to surface weeds growing. The good news is that in many cases, a jet washer can both loosen and remove the weed and root from the resin surface. It can also blow out the dirt and other debris that the weeds like to live in. Regular cleaning using a jet washer can prevent weeds from returning in the future too. If jet washing doesn’t work because the weeds are so deep-rooted, you can kill them off with a suitable herbicide or weed killer.

Can jet washing remove chewing gum?

Chewing gum can be a real annoyance. When it finds its way on a resin driveway, it’s not only unsightly but can be incredibly difficult to remove once it becomes hardened. In some cases, jet washing can remove chewing gum, although this can be difficult if it’s already died out. If you can’t get rid of it by jet washing, you can try using a freezing spray on the gum. You may then be able to remove it using a wall scraper or another similar tool. Don’t try and dig underneath the gum using a hard edge since this may damage the surface.

Advice on maintaining your resin driveway 

At Resin Mixed Stone, we’re widely considered to be the leading installer of resin driveways in Sheffield. So, if you’re still wondering can you jet wash a resin drive or you have other questions about maintenance or upkeep, don’t hesitate to reach out to us. We can offer you expert advice on keeping your driveway looking and performing its best long into the future. If you do hire us to provide your new resin driveway, our work doesn’t stop once the installation is complete. We’re on hand to provide a high level of aftercare, assisting you with a variety of possible issues and concerns. 

Contact us 

Can you jet wash a resin drive is one of the most common questions we get asked here at Resin Mixed Stone. To find out more about how to care for your resin driveway, don’t hesitate to get in touch with our team. Call us on 0114 419 0236 to discuss your requirements. Alternatively, complete our online contact form and we’ll get back to you as soon as we can. As the leading installer of resin driveways in Sheffield, we’re confident that we can assist you. We have been serving home and business owners in the South Yorkshire region for many years, building a fantastic reputation for our professional, affordable services.